Abstract and subjects
This research utilizes linear and nonlinear ultrasonic techniques to establish a linkage between microstructure and macroscale mechanical properties of additively manufactured (AM) stainless steel 316L samples. The specimens are manufactured using two methods: laser-powder bed fusion and traditional wrought manufacturing. Using the nonlinear ultrasonic method of second harmonic generation, the acoustic nonlinearity parameter is estimated in samples with different heat treatment levels intended to alter microstructural and mechanical properties. Linear ultrasonic parameters including wave speed and resonant frequency are additionally measured. Mechanical properties are obtained through tensile testing of coupons corresponding to the test samples. Microstructural information for the samples is obtained using electron backscatter diffraction to help elucidate the relationships between microstructure, mechanical properties, and ultrasonic response. Results indicate correlations between the nonlinearity parameter and both ultimate tensile strength and yield strength, where nonlinearity generally decreases as sample strength increases, particularly in the AM samples. We hypothesize that microstructural evolution of grain characteristics across different heat treatments influences trends in measured nonlinearity, as well as substructures at smaller scales such as dislocations. These results show promising evidence for the feasibility of AM parts qualification using nondestructive nonlinear ultrasonic testing.